There are two main types of blind installation that can be applied to your window:
Inside Window Recess (Recess)
Info
Give the width and height of the recess. We will deduct a small amount from the blind width so it fits the recess. Please measure the top middle and bottom of the recess and give the smallest measurement. For roller blinds only measure the top of the recess. Select "recess" when ordering and input measurement in cm width x drop.
Outside Window Recess (Exact)
Info
Decide how much you want the blind to overlap the recess at each side and from top and bottom. Select "exact" when ordering and input measurement in cm width x drop.
Additional information when measuring for roller blinds. Please note that the cloth width will be 30mm (1.25") narrower than the overall size.
Valance Returns
When fitting a blind on the outside of a recess, some blinds have the option to order a mitre return. This is where the pelmet covering the headrail returns on itself at each end.
Handles
If you have any large handles protruding from the window, measure the width of the recess at the point in the recess where the blind will hang to clear the handle.
Tiles, Picture rails or skirting boards
If your window has tiles, picture rails or shirting boards around the recess of the window, measure inside these to ensure the blinds will hang down to the window sill.
Angled Reveals
Measure between the smallest points where the blind is to fit.
Please email or call us if you have any questions. support@direct-blinds.net
